Halland Instruments AS

Applications in other industries:

The PH-1400 analyzer:

The ORP-1400 analyzer:

The ASRM-1300 automatic sedimentaion rate measuring station:

pH and ORP analyzers for the cobalt production processes.

The “PH-1400” pH analyzer and the “ORP-1400” REDOX analyzer delivers accurate measurements in the cobalt production process. Our analyzers are used in the processing of African Copper Belt copper-cobalt ores and in the cobalt purification process in hydrochloric nickel processing plants.
Accurate pH and ORP measurements are very important in the processing of copper-cobalt ores and in the purification process of cobalt in the hydrochloric plants. The yield is increased and the overdosing of the precipitation reagents is eliminated.
The problem is that other pH measuring systems have low accuracy and short lifetime of the electrodes.
The main causes of the problems are poisoning of the reference electrode and build-up of a layer of coating from the complex process solution on the pH electrode.
Our PH-1400 analyzer has high accuracy and the lifetime of the electrodes are very long, many months or even years. The reference electrode is never poisoned and the pH electrode surface is kept clean by an advanced cleaning system. 
Other systems require frequent calibrations, however, this only disguise the problem, the problem of low accuracy persists. A short lifetime of the electrodes or combination electrode is a symptom of low average accuracy, making process optimization impossible.

The following properties distinguish our analyzers from other known technology:
1. Most reliable, infrequent error with the analyzer or the electrodes, very low-maintenance.
2. High short-term and long-term accuracy.
3. Very long life of the electrodes, it is not possible to get high long-term accuracy without long electrode life.
4. Other systems require frequent calibration and still are not accurate. Our analyzer gives high accuracy even with weeks’ interval between calibrations.
5. It is fast and easy to calibrate the analyzer, there is no sample head which must be dismantled for calibration.
6. It is easy to install the analyzer and normally no encroachment in the process equipment is needed.

Other features:
1. Automatic cleaning of the electrodes by spraying the electrodes from below cleans the sensor surface mechanically and cleaning with chemicals prevents build-up of coating.
2. The analyzer is designed for harsh environments with high temperatures, acid, dust and gases. The analyzer is designed to tolerate electrical noise and fluctuations in the supply voltage. 
3. Easy to operate, logical menu structure, easy-to-use two point calibration procedure with calibration plausibility check.
4. The electrode system is designed in such a way that the reference electrode never can be poisoned.
5. The analyzer is designed for measuring the pH of solutions with high solid content and very high temperatures
6. The electrodes are in controlled pressure conditions and are protected against mechanical strains.
7. Large two-line LCD display with LED back-light.
8. Measuring range 0-14 pH.
9. Modbus port for data communication, 4-20 mA output and alarm output.

“ASRM-1300”, the  automatic on-line sedimentation rate meter.
The ASRM-1300 measures the time required for the sample to become clear or translucent, down to a fixed (adjustable) distance beneath the surface. The instrument sucks a sample from the process to a measuring cell (cylinder), where the required time for settling is measured. The sample is then returned to the process. Then the instrument sucks up a dose of detergent, for instance an acid, from a container and sprays the detergent into the cylinder. The cylinder is then washed with water, and the cycle is repeated. The frequency of washing with detergent is programmable. The instrument gives you a unique possibility for process optimizing, because it measures the response to changes in settling properties so rapidly and automatically. A manual sample is not the same, it is not possible to replicate an automatic measurement because the manual measurement is depending of how accurate the operator is.
This is truly an early warning system for any oncoming process difficulties. The instrument is a complete-working unit for sampling, measuring and washing of the cell. It has 4-20 mA output and Modbus RTU computer interface.
The sample is usually taken from a tank, launder or pipe, before the thickener or filtration station, but after the addition of flocculant, if used.

Proven technology
Our analyzers are the result of 40 years of experience with design, construction, servicing and sale of pH analyzers to the industry.
The Norzink/Halland pH analyzers have been sold to zinc plants world-wide for 40 years. The first model was developed at the Norzink zinc plant in Odda in 1971. In the early 1980’s Norzink developed a new model, it was called “SLURpH”, this model replaced the first generation and many zinc plants bought this analyzer. This analyzer was sold to the fertilizer industry too. In 1998 the business was handed over to Halland Instruments AS. In 1999 the third generation of pH analyzers were developed, the model PH-13. Hindustan Zinc bought many analyzers for the three new zinc plants they built in 2004, 2006 and 2008. The experiences we got from commissioning and servicing these plants in Rajasthan in India, with ambient temperatures of 50 degrees centigrade, were the reasons to develop a new analyzer, the model PH-1300. The last years the analyzers have been developed even further with our experience from our installations in the cobalt, nickel and zinc industry.